Development of an intelligent decision model for non-traditional machining processes
DOI:
https://doi.org/10.31181/dmame2104194cKeywords:
Non-traditional machining process; Parameter; Response; Decision model; VBASICAbstract
In order to fulfil the ever increasing requirements of various hard and difficult-to-machine materials in automobile, turbine, nuclear, aviation, tool and die making industries, the conventional material removal processes are now being continuously substituted by an array of non-traditional machining (NTM) processes. The efficient and improved capabilities of these NTM processes have made them indispensible for the present day manufacturing industries. While deploying a particular NTM process for a specific machining application, the concerned process engineer must be aware of its capability which is influenced by a large number of controllable parameters. In this paper, an intelligent decision model is designed and developed in VBASIC to guide the concerned process engineer to have an idea about the values of various NTM process responses for a given parametric combination. It would also advise about the tentative settings of different NTM process parameters for achieving a set of target response values. The operational procedure of this developed system is demonstrated with the help of three real time examples.
Downloads
References
Adalarasan, R., Santhanakumar, M., & Rajmohan, M. (2015). Application of grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel. International Journal of Advanced Manufacturing Technology, 78(5-8), 1161-1170.
Amalnik, M.S. (2019). Design and manufacturing optimization of abrasive water jet machining using expert system. International Journal of Advanced Design and Manufacturing Technology, 12(1), 101-114
Azaryoon, A., Hamidon, M., & Radwan, A. (2015). An expert system based on a hybrid multi-criteria decision making method for selection of non-conventional machining processes. In Applied Mechanics and Materials, Trans Tech Publications Ltd., 735, 41-49.
Bhosale, S.B., Pawade, R.S., & Brahmankar, P.K. (2014) Effect of process parameters on MRR, TWR and surface topography in ultrasonic machining of alumina–zirconia ceramic composite. Ceramics International, 40(8), 12831-12836.
Chakladar, N.D., & Chakraborty, S. (2008). A combined TOPSIS-AHP-method-based approach for non-traditional machining processes selection. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(12), 1613-1623.
Chakladar, N.D., Das, R., & Chakraborty, S. (2009). A digraph-based expert system for non-traditional machining processes selection. International Journal of Advanced Manufacturing Technology, 43(3), 226-237.
Chakraborty, S., & Dey, S. (2006). Design of an analytic-hierarchy-process-based expert system for non-traditional machining process selection. International Journal of Advanced Manufacturing Technology, 31(5-6), 490-500.
Chakraborty, S., & Dey, S. (2007). QFD-based expert system for non-traditional machining processes selection. Expert Systems with Applications, 32(4), 1208-1217.
Chakraborty, S., Dandge, S.S., & Agarwal, S. (2020). Non-traditional machining processes selection and evaluation: A rough multi-attributive border approximation area comparison approach. Computers & Industrial Engineering, 139, 106-201.
Chandraseelan, E.R., Jehadeesan, R., & Raajenthiren, M. (2008). Web-based knowledge based system for selection of non-traditional machining processes. Malaysian Journal of Computer Science, 21(1), 45-56.
Chatterjee, P., Mondal, S., Boral, S., Banerjee, A., & Chakraborty, S. (2017). A novel hybrid method for non-traditional machining process selection using factor relationship and multi-attributive border approximation method. Facta Universitatis, Series: Mechanical Engineering, 15(3), 439-456.
Das, M.K., Kumar, K., Barman, T.K., & Sahoo, P. (2014). Optimization of process parameters in plasma arc cutting of EN31 steel based on MRR and multiple roughness characteristics using grey relational analysis. Procedia Materials Science, 5, 1550-1559.
Datta, S., Biswal, B.B., & Mahapatra, S.S. (2017). A novel satisfaction function and distance-based approach for machining performance optimization during electro-discharge machining on super alloy Inconel 718. Arabian Journal for Science and Engineering, 42(5), 1999-2020.
El-Hofy, H. (2005). Advanced Machining Processes: Nontraditional and Hybrid Machining Processes. McGraw Hill Professional, USA.
Gopalakannan, S., Senthivelan, T., & Ranganathan, S. (2012). Modeling and optimization of EDM process parameters on machining of Al7075-B4C MMC using RSM, Procedia Engineering, 38(1), 685-690.
Jain, V.K. (1980). Advanced Machining Processes. Allied publishers Pvt. Ltd., India.
Karande, P., & Chakraborty, S. (2012). Application of PROMETHEE-GAIA method for non-traditional machining processes selection. Management Science Letters, 2(6), 2049-2060.
Kataria, R., Kumar, J., & Pabla, B.S. (2017). Ultrasonic machining of WC-Co composite material: Experimental investigation and optimization using statistical techniques. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(5), 867-880.
Khandekar, A.V., & Chakraborty, S. (2016). Application of fuzzy axiomatic design principles for selection of non-traditional machining processes. International Journal of Advanced Manufacturing Technology, 83(1-4), 529-543.
Kiyak, M., & Çakır, O. (2007). Examination of machining parameters on surface roughness in EDM of tool steel. Journal of Materials Processing Technology, 191(1-3), 141-144.
Kumar, J., & Khamba, J.S. (2010). Multi-response optimisation in ultrasonic machining of titanium using Taguchi's approach and utility concept. International Journal of Manufacturing Research, 5(2), 139-160.
Lin, Y.C., & Lee, H.S. (2008). Machining characteristics of magnetic force-assisted EDM. International Journal of Machine Tools and Manufacture, 48(11), 1179-1186.
Madić, M., Petković, D., & Radovanović, M. (2015a). Selection of non-conventional machining processes using the OCRA method. Serbian Journal of Management, 10(1), 61-73.
Madić, M., Radovanović, M., & Petković, D. (2015b). Non-conventional machining processes selection using multi-objective optimization on the basis of ratio analysis method. Journal of Engineering Science and Technology, 10(11), 1441-1452.
Mittal, S., & Mahajan, M.D. (2018). Multi-response parameter optimization of CNC plasma arc machining using Taguchi methodology. Industrial Engineering Journal, 11(12), 1550-1559.
Pandey, P.C., & Shan, H.S. (1980). Modern Machining Processes. Tata McGraw-Hill Education, India.
Prasad, K., & Chakraborty, S. (2018). A decision guidance framework for non-traditional machining processes selection. Ain Shams Engineering Journal, 9(2), 203-214.
Rajurkar, K.P., Hadidi, H., Pariti, J., & Reddy, G.C. (2017). Review of sustainability issues in non-traditional machining processes. Procedia Manufacturing, 7, 714-720.
Ramakrishnan, H., Balasundaram, R., Ganesh, N., & Karthikeyan, N. (2018). Experimental investigation of cut quality characteristics on SS321 using plasma arc cutting. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(60), 1-11.
Ray, A. (2016). Optimization of process parameters of green electrical discharge machining using principal component analysis (PCA). International Journal of Advanced Manufacturing Technology, 87(5-8), 1299-1311.
Rohith, R., Shreyas, B.K., Kartikgeyan, S., Sachin, B.A., Umesha, K.R., & Nanjundeswaraswamy, T.S. (2019). Selection of non-traditional machining process. International Journal of Engineering Research & Technology, 8(11), 148-155.
Roy, M.K., Ray, A., & Pradhan, B.B. (2014). Non-traditional machining process selection using integrated fuzzy AHP and QFD techniques: A customer perspective. Production & Manufacturing Research, 2(1), 530-549.
Roy, M.K., Ray, A., & Pradhan, B.B. (2017). Non-traditional machining process selection - An integrated approach. International Journal for Quality Research, 11(1), 71-94.
Saenz, D.C., Castillo, N.G., Romeva, C.R., & Macia, J.L. (2015). A fuzzy approach for the selection of non-traditional sheet metal cutting processes. Expert Systems with Applications, 42(15), 6147-6154.
Salonitis, K., & Vatousianos, S. (2012). Experimental investigation of the plasma arc cutting process. Procedia CIRP, 3(1), 287-292.
Sarkar, A., Panja, S.C., Das, D., & Sarkar, B. (2015). Developing an efficient decision support system for non-traditional machine selection: An application of MOORA and MOOSRA. Production & Manufacturing Research, 3(1), 324-342.
Singh, D., & Shukla, R.S. (2020). Development of firefly algorithm interface for parameter optimization of electrochemical-based machining processes. In Applications of Firefly Algorithm and its Variants, Springer, Singapore, 29-52.
Sugumaran, V., Muralidharan, V., & Hegde, B.K. (2010). Intelligent process selection for NTM - A neural network approach. International Journal of Industrial Engineering Research and Development, 1(1), 87-96.
Talib, F., & Asjad, M. (2019). Prioritisation and selection of non-traditional machining processes and their criteria using analytic hierarchy process approach. International Journal of Process Management and Benchmarking, 9(4), 522-546.
Temuçin, T., Tozan, H., Valíček, J., & Harničárová, M. (2013). A fuzzy based decision support model for non-traditional machining process selection. Tehnicki vjesnik - Technical Gazette, 20(5), 787-793.
Xu, W.J., Fang, J.C., & Lu, Y.S. (2002). Study on ceramic cutting by plasma arc. Journal of Materials Processing Technology, 129(1-3), 152-156.
Yurdakul, M., & Cçogun, C. (2003). Development of a multi-attribute selection procedure for non-traditional machining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217(7), 993-1009.
Yurdakul, M., & İç, Y.T. (2019). Comparison of fuzzy and crisp versions of an AHP and TOPSIS model for nontraditional manufacturing process ranking decision. Journal of Advanced Manufacturing Systems, 18(2), 167-192.
Yurdakul, M., İç, Y.T., & Atalay, K.D. (2019). Development of an intuitionistic fuzzy ranking model for nontraditional machining processes. Soft Computing, 24(1), 1-16.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Decision Making: Applications in Management and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
