Bibliometric analysis of DEMATEL method
DOI:
https://doi.org/10.31181/dmame2104085gKeywords:
Multi-Criteria Decision Making, Bibliometric, Web of Science, DEMATELAbstract
In this study, a bibliometric analysis of the studies evaluated with DEMATEL (Decision Making Experiment and Evaluation Laboratory Method), one of the MCDM methods in Web of Science, was performed according to various performance indicators. The total number of DEMATEL publications examined is 1963 documents. When DEMATEL studies are evaluated in terms of countries, it is seen that China is the leader (553 documents; 28.17%). The most cooperative country is China. The country with the highest h-index is Taiwan (62). Journal of Cleaner Production is the most efficient journal (96; 4.88%). National Chiao Tung University (102, 5.19%) is ranked as the most efficient institution in DEMATEL research. Among the most used words are "Model", "DEMATEL", "Selection", "Management", "fuzzy DEMATEL".
Downloads
References
Abu-Taha, R. (2011). Multi-criteria applications in renewable energy analysis: A literature review. In 2011 Proceedings of PICMET'11: Technology Management in the Energy Smart World (PICMET) (pp. 1-8). IEEE.
Aytaç, M., & Gürsakal, N. (2015). Karar verme. Dora Basım Yayın Dağıtım AŞ, Bursa.
Blanco-Mesa, F., Merigó, J. M., & Gil-Lafuente, A. M. (2017). “Fuzzy decision making: A bibliometric-based review.” Journal of Intelligent & Fuzzy Systems, 32(3), 2033-2050.
Bragge, J., Korhonen, P., Wallenius, H., & Wallenius, J. (2010). Bibliometric analysis of multiple criteria decision making/multiattribute utility theory. In Multiple criteria decision making for sustainable energy and transportation systems (pp. 259-268). Springer, Berlin, Heidelberg.
Büyüközkan, G., & Çifçi, G. (2012). A novel hybrid MCDM approach based on fuzzy DEMATEL, fuzzy ANP and fuzzy TOPSIS to evaluate green suppliers. Expert Systems with Applications, 39(3), 3000-3011.
Çelikbilek, Y., & Özdemir, M. (2018). Çok kriterli karar verme yöntemleri. Ankara: Nobel Akademik Yayıncılık.
Çetinkaya Bozkurt, Ö. ve Çetin, A. (2016), “Girişimcilik ve Kalkınma Dergisi’nin Bibliyometrik Analizi”, Girişimcilik ve Kalkınma Dergisi, 11(2), 229-263.
Chang, B., Chang, C. W., & Wu, C. H. (2011). Fuzzy DEMATEL method for developing supplier selection criteria. Expert systems with Applications, 38(3), 1850-1858.
Chowdhury, P., & Paul, S. K. (2020). Applications of MCDM methods in research on corporate sustainability: A systematic literature review. Management of Environmental Quality: An International Journal, 31(2), 385-405
Cole, F. J., & Eales, N. B. (1917). The history of comparative anatomy: Part I.—A statistical analysis of the literature. Science Progress (1916-1919), 11(44), 578-596.
Ellegaard, O., & Wallin, J. A. (2015). The bibliometric analysis of scholarly production: How great is the impact?. Scientometrics, 105, 1809-1831.
Guerrero-Baena, M. D., Gómez-Limón, J. A., & Fruet Cardozo, J. V. (2014). “Are multi-criteria decision making techniques useful for solving corporate finance problems? A bibliometric analysis.”Revista de Metodos Cuantitativos para la Economia y la Empresa, 17, 60-79.
Gul, M., Celik, E., Aydin, N., Gumus, A. T., & Guneri, A. F. (2016). “A state of the art literature review of VIKOR and its fuzzy extensions on applications.” Applied Soft Computing, 46, 60-89.
Hotamışlı, M., & Erem, I. (2014). “Bibliometric analysis of the articles published in journal of accounting and finance.” The Journal of Accounting and Finance, 16(63), 1-19.
Hsu, C. W., Kuo, T. C., Chen, S. H., & Hu, A. H. (2013). “Using DEMATEL to develop a carbon management model of supplier selection in green supply chain management.” Journal of cleaner production, 56, 164-172.
Kahraman, C., Onar, S. C., & Oztaysi, B. (2015). “Fuzzy multicriteria decision-making: a literature review.” International journal of computational intelligence systems, 8(4), 637-666.
Karaoğlan, S. (2016). “Dematel ve Vikor Yöntemleriyle Dış Kaynak Seçimi: Otel İşletmeciliği Örneği”, Akademik Bakış Dergisi, 55, 9-24.
Lawani, S. M (1981). “Bibliometrics: Its Theoretical Foundations, Methods and Applications”, International Journal of Libraries and Information Services, Cilt: 31, 4, 294-315.
Liao, H., Tang, M., Zhang, X., & Al-Barakati, A. (2019). “Detecting and Visualizing in the Field of Hesitant Fuzzy sets: A Bibliometric Analysis From 2009 to 2018”, International Journal of Fuzzy Systems, 21(5), 128.
Lin, C. J., & Wu, W. W. (2008). “A causal analytical method for group decision-making under fuzzy environment.” Expert Systems with Applications, 34(1), 205-213.
Lin, C.L. & Tzeng, G.H. (2009). “A value-created system of science (technology) park by using DEMATEL”, Expert systems with applications, 36(6), 9683-9697.
Lin, R. J. (2013). “Using fuzzy DEMATEL to evaluate the green supply chain management practices.” Journal of Cleaner Production, 40, 32-39.
Liu, H. C., Chen, X. Q., Duan, C. Y., & Wang, Y. M. (2019). “Failure mode and effect analysis using multi-criteria decision making methods: A systematic literature review.”Computers & Industrial Engineering, 135, 881-897.
Liu, W., & Liao, H. (2017). “A bibliometric analysis of fuzzy decision research during 1970–2015.” International Journal of Fuzzy Systems, 19(1), 1-14.
Mardani, A., Jusoh, A., Nor, K., Khalifah, Z., Zakwan, N., & Valipour, A. (2015). “Multiple criteria decision-making techniques and their applications–a review of the literature from 2000 to 2014.” Economic Research-Ekonomska Istraživanja, 28(1), 516-571.
Merigó, J. M., & Yang, J. B. (2017). A bibliometric analysis of operations research and management science. Omega, 73, 37-48.
Morkūnaitė, Ž.,Kalibatas, D., & Kalibatienė, D. (2019). “A Bibliometric Data Analysis of MultiCriteria Decision Making Methods in Heritage. Buildings”, Journal of Civil Engineering and Management, 25(2), 76-99.
Osareh, F. (1996). Bibliometrics, citation analysis and co-citation analysis: A review of literature I.
Peng, X., & Dai, J. (2018). “A Bibliometric Analysis of Neutrosophic Set: Two Decades Review From 1998 to 2017”, Artificial Intelligence Review, 1-57.
Renganath, K., & Suresh, M. (2016). “Supplier selection using fuzzy MCDM techniques: A literature review.” In 2016 IEEE International Conference on Computational Intelligence and Computing Research (ICCIC) (1-6). IEEE.
Shgeh, J.,Wu, H. & Huang, K. (2010). “A DEMATEL Method in Identifying Key Success Factors of Hospital Service Quality”, Knowlwdge-Based Systems. 23(3): 277-282.
Shieh, J. I., Wu, H. H., & Huang, K. K. (2010). A DEMATEL method in identifying key success factors of hospital service quality. Knowledge-Based Systems, 23(3), 277-282.
Stevens, R.E. (1953). Characteristics of Subject Literatures, Chicago: American College and Research Library Monography Series 7.
Stojčić, M., Zavadskas, E. K., Pamučar, D., Stević, Ž., & Mardani, A. (2019). Application of MCDM methods in sustainability engineering: A literature review 2008–2018.”Symmetry, 11(3), 350.
Tramarico, C. L., Salomon, V. A. P., & Marins, F. A. S. (2015). “Analytic hierarchy process and supply chain management: A bibliometric study.”Procedia Computer Science, 55, 441-450.
Tseng, M. L. (2009). A causal and effect decision making model of service quality expectation using grey-fuzzy DEMATEL approach. Expert systems with applications, 36(4), 7738-7748.
Tzeng, G. H., Chiang, C. H., & Li, C. W. (2007). Evaluating intertwined effects in e-learning programs: A novel hybrid MCDM model based on factor analysis and DEMATEL. Expert systems with Applications, 32(4), 1028-1044.
Wu, W. W. (2008). “Choosing knowledge management strategies by using a combined ANP and DEMATEL approach.” Expert Systems with Applications, 35(3), 828-835.
Wu, W. W., & Lee, Y. T. (2007). Developing global managers’ competencies using the fuzzy DEMATEL method. Expert systems with applications, 32(2), 499-507.
Yıldırım, B.F., & Önder, E. (2018). “Operasyonel, Yönetsel ve Stratejik Problemlerin Çözümünde Çok Kriterli Karar Verme Yöntemleri”. Dora Basım Yayın Dağıtım AŞ, Bursa.
Yu, D., Wang, W., Zhang, W., & Zhang, S. (2018). “A Bibliometric Analysis of Research on Multiple Criteria Decision Making”, Current Science, 114(4), 747-758.
Zavadskas, E. K., Turskis, Z., & Kildienė, S. (2014). “State of Art Surveys of Overviews on MCDM/MADM Methods.” Technological and Economic Development of Economy, 20(1), 165- 179.
Zyoud, S. H., & Fuchs-Hanusch, D. (2017). “A Bibliometric-Based Survey on AHP and TOPSIS Techniques”, Expert Systems with Applications, 78, 158-181.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Decision Making: Applications in Management and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
