Evaluation of solid waste treatment methods in Libya by using the analytic hierarchy process
DOI:
https://doi.org/10.31181/dmame1902038bKeywords:
Waste management, multi-criteria evaluation, AHP, LibyaAbstract
Evaluation and selection of the appropriate method for solid waste treatment (SWT) in Libya are a complex problem and require an extensive evaluation process. This is because it is very difficult to develop a selection criterion that can precisely describe the preference of one method over another. Waste management is the collection, transport, treatment, recycling or disposal and monitoring waste materials. In this paper, four treatment systems for waste management in Libya are evaluated using the analytic hierarchy process (AHP) in respect to four main criteria and twenty-two sub-criteria. The treatment systems for waste management are anaerobic digestion, landfilling, incineration and compost. The selected criteria used in the evaluation of four treatment systems are environmental impacts, socio-cultural aspects, technical aspects and economic aspects. According to the evaluation, anaerobic digestion ranks the highest in classification in Libya. Compost ranks higher than landfilling and incineration. Furthermore, it should be noted that the rank of waste treatment systems can be changed according to the future technological developments.
Downloads
References
Abd Manaf, L., Samah, M. A. A., & Zukki, N. I. M. (2009). Municipal solid waste management in Malaysia: Practices and challenges. Waste management, 29(11), 2902-2906.
Ali, A. O. G. (2014). Solid waste pollution and the importance of environmental planning in managing and preserving the public environment in Benghazi city and its surrounding areas. International Journal of Environmental and Ecological Engineering, 7(12), 924-929.
Aljaradin, M., & Persson, K. M. (2014). Solid waste management in Jordan. International Journal of Academic Research in Business and Social Sciences, 4(11), 138-150.
Babalola, M. A. (2015). A multi-criteria decision analysis of waste treatment options for food and biodegradable waste management in Japan. Environments, 2(4), 471-488.
Badi, I., Sawalem, M., & Shetwan, A. (2016). Feasibility study of waste incineration plant in the city of Misrata-Libya. International Journal of engineering sciences & research technology, 5(2), 153-159.
Chai, J., Liu, J. N., & Ngai, E. W. (2013). Application of decision-making techniques in supplier selection: A systematic review of literature. Expert systems with applications, 40(10), 3872-3885.
Charles, W., Walker, L., & Cord-Ruwisch, R. (2009). Effect of pre-aeration and inoculum on the start-up of batch thermophilic anaerobic digestion of municipal solid waste. Bioresource technology, 100(8), 2329-2335.
Chatterjee, K., Pamucar, D., & Zavadskas, E. K. (2018). Evaluating the performance of suppliers based on using the R'AMATEL-MAIRCA method for green supply chain implementation in electronics industry. Journal of cleaner production, 184, 101-129.
Chen, Y., Cheng, J. J., & Creamer, K. S. (2008). Inhibition of anaerobic digestion process: a review. Bioresource technology, 99(10), 4044-4064.
DEFRA. (2007). Incineration of Municipal Solid Waste. UK: Department for Environment, Food & Rural Affairs.
EPA-CICA. (2003). Air Pollution Control Technology Fact Sheet Thermal Incinerator EPA-452/F-03-022.
Gebril, A. O., Omran, A., Pakir, A. H. K., & Aziz, H. A. (2010). Municipal solid waste management in benghazi (Libya): Current practices and challenges. Environmental Engineering and Management, 9(9), 1289-1296.
Generowicz, A., Kulczycka, J., Kowalski, Z., & Banach, M. (2011). Assessment of waste management technology using BATNEEC options, technology quality method and multi-criteria analysis. Journal of Environmental Management, 92(4), 1314-1320.
Hamad, T. A., Agll, A. A., Hamad, Y. M., & Sheffield, J. W. (2014). Solid waste as renewable source of energy: current and future possibility in Libya. Case studies in thermal Engineering, 4(2), 144-152.
ICAC. (1999). Control Technology Information - Thermal Oxidation. https://www.epa.gov/air-emissions-monitoring-knowledge-base/monitoring-control-technique-thermal-oxidizer, Accessed 13 March 2017.
Ismail, S. N. S., & Latifah, A. M. (2013). The challenge of future landfill: A case study of Malaysia. Journal Toxicology and Environmental Health Sciences (JTEHS), 5(3), 2400-2407.
Javaheri, H., Nasrabadi, T., Jafarian, M. H., Rowshan, G. R., & Khoshnam, H. (2006). Site selection of municipal solid waste landfills using analytical hierarchy process method in a geographical information technology environment in Giroft. Journal of environmental health science & engineering, 3(3), 177-184.
Jovanović, S., Jovičić, N., Bošković, G., Savić, S., & Đorđević, Z. (2016). Selection of the optimal system for municipal solid waste management by integrated application of LCA and MCDM methods. Paper presented at the 1st International conference on Quality of Life Faculty of Engineering, University of Kragujevac.
Karami, A. (2011). Utilization and comparison of multi attribute decision making techniques to rank Bayesian network options. (Master Thesis), University of Skovde, Sweden.
Khan, S., & Faisal, M. N. (2008). An analytic network process model for municipal solid waste disposal options. Waste management, 28(9), 1500-1508.
Ladan, S. I. (2014). Composting as a sustainable waste management method in Katsina Metropolis, northern Nigeria. International Journal of Bioscience, Biochemistry and Bioinformatics, 4(1), 11-13.
Moftah, W. A., Marković, D., Moftah, O. A., & Nesseef, L. (2016). Characterization of household solid waste and management in tripoli City—Libya. Open Journal of Ecology, 6(07), 435.
Najjar, A. K., Elmelah, M. A., Bannani, F. K., & Ghania, F. M. (2015). Estimation of polyvinylchloride (PVC) in household solid waste at Tripoli-Libya: A case study. Sci Rev Chem Commun, 5(2), 51-56.
Omran, A., Altawati, M., & Davis, G. (2018). Identifying municipal solid waste management opportunities in Al-Bayda City, Libya. Environment, Development and Sustainability, 20, 1597-1613.
Pamučar, D., Lukovac, V., Božanić, D., & Komazec, N. (2018a). Multi-criteria FUCOM-MAIRCA model for the evaluation of level crossings: case study in the Republic of Serbia. Operational Research in Engineering Sciences: Theory and Applications, 1(1), 108-129.
Pamučar, D., Stević, Ž., & Sremac, S. (2018b). A new model for determining weight coefficients of criteria in mcdm models: Full consistency method (FUCOM). Symmetry, 10(9), 393.
Saaty, T. L. (1979). Applications of analytical hierarchies. Mathematics and Computers in Simulation, 21(1), 1-20.
Saaty, T. L. (1980). The Analytic Hierarchy Process. New York: Mc Graw‐Hill.
Saaty, T. L. (1990). How to make a decision: the analytic hierarchy process. European journal of operational research, 48, 9-26.
Saaty, T. L., & Vargas, L. G. (2012). Models, methods, concepts & applications of the analytic hierarchy process (Vol. 175). Springer Science & Business Media.
Sawalem, M., Selic, E., & Herbell, J. D. (2009). Hospital waste management in Libya: A case study. Waste management, 29(4), 1370-1375.
Stević, Ž., Pamučar, D., Vasiljević, M., Stojić, G., & Korica, S. (2017). Novel integrated multi-criteria model for supplier selection: Case study construction company. Symmetry, 9(11), 279.
Tabasi, R., & Marthandan, G. (2013). Clinical waste management: A review on important factors in clinical waste generation rate. International Journal of Science and Technology, 3(3), 194-200.
Thompson-Smeddle, L. (2011). Solid waste management city of Cape Town Smart Living Handbook. (4th ed.). Cape Town: City of Cape Town.
Wang, J., Liu, S. Y., & Zhang, J. (2005). An extension of TOPSIS for fuzzy MCDM based on vague set theory. Journal of systems science and systems engineering, 14, 73-84.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Decision Making: Applications in Management and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
