Constructing a Multi-Objective Optimization Model for Engineering Projects Based on NSGA-II Algorithm under the Background of Green Construction
DOI:
https://doi.org/10.31181/dmame712024895Keywords:
Green construction, NSGA - II algorithm, MOP model, Hill climbingAbstract
In the context of Sustainability Development (SD), Green Construction (GC) has become a key direction for optimizing engineering project objectives. In order to improve the management ability of project engineering in GC, an improved NSGA - II algorithm was used in this study to establish a multi-optimization model for engineering projects. In this process, the hill climbing is introduced to improve the search ability of NSGA - Ⅱ algorithm. Finally, a Multi-Objective Optimization (MOP) model with strong convergence and distribution was obtained. In subsequent validation experiments, the total construction period of the engineering project MOP model based on the improved NSGA - II algorithm was between 190 and 234days. The total cost ranges from 171,473 to 20,461,800 yuan. Its total mass ranges from 90.41% to 92.19%. Its total safety is between 91.30% and 99.32%. The total environment is between 144.54 and 193.58. Its total resources range from 86.21% to 99.91%. The cost of improving the NSGA-II algorithm is 500300 yuan lower than that of the NSGA-II algorithm, with a resource target increase of 0.4% and an environmental target increase of 4.33%. The iteration curves of the improved NSGA - II algorithm in terms of duration, cost, and environmental objective function are lower than those of the NSGA - II algorithm. Overall, the improved NSGA - II algorithm has better MOP performance, can obtain better Pareto solutions, and has better performance.
Downloads
References
Onubi, H. O., Yusof, N. A., Hassan, A. S., & Bahdad, A. A. S. (2021). Analyzing the mediating effect of economic performance on the relationship between green construction practices and health and safety performance in Nigeria. Environmental Science and Pollution Research, 28(27), 36598-36610. https://doi.org/10.1007/s11356-021-13334-6
Wang, Y., Chong, D., & Liu, X. (2021). Evaluating the critical barriers to green construction technologies adoption in China. Sustainability, 13(12), 6510-6523. https://doi.org/10.3390/su13126510
Abdollahzadeh, N., & Biloria, N. (2022). Urban microclimate and energy consumption: A multi-objective parametric urban design approach for dense subtropical cities. Frontiers of Architectural Research, 11(3), 453-465. https://doi.org/10.1016/j.foar.2022.02.001
Let, S., Bar, N., Basu, R. K., & Das, S. K. (2022). Minimum fluidization velocities of binary solid mixtures: Empirical correlation and genetic algorithm-artificial neural network modeling. Chemical Engineering & Technology, 45(1), 73-82. https://doi.org/10.1002/ceat.202100170
Günaydın, A. C., Yıldız, A. R., & Kaya, N. (2022). Multi-objective optimization of build orientation considering support structure volume and build time in laser powder bed fusion. Materialpruefung: Werkstoffe und Bauteile, ForschungPrufungAnwendung, 64(3), 323-338. https://doi.org/10.1515/mt-2021-2075
Majid, M. I., & Khan, M. I. (2021). Techno-economic analysis of green construction regulations plus survey for prototype implementation in Karachi. Pakistan Journal of Scientific and Industrial Research Series A: Physical Sciences, 64(2), 161-172. https://doi.org/10.52763/PJSIR.PHYS.SCI.64.2.2021.161.172
Blackburne, L., Gharehbaghi, K., & Hosseinian-Far, A. (2022). The knock-on effects of green buildings: high-rise construction design implications. International Journal of Structural Integrity, 13(1), 57-77. https://doi.org/10.1108/IJSI-06-2021-0062
Cao, Y., Kamaruzzaman, S. N., & Aziz, N. M. (2022). Green building construction: a systematic review of BIM utilization. Buildings, 12(8), 1205-1233. https://doi.org/10.3390/buildings12081205
Khalili, N., ShahnazariShahrezaei, P., & Abri, A. G. (2020). A multi-objective optimization approach for a nurse scheduling problem considering the fatigue factor (case study: Labbafinejad Hospital). Journal of Applied Research on Industrial Engineering, 7(4), 396-423. https://doi.org/10.22105/jarie.2020.259483.1215
Khodashenas, M., Kazemipoor, H., Najafi, S. E., & Movahedi Sobhani, F. (2022). A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery. International Journal of Research in Industrial Engineering, 11(3), 273-305. https://doi.org/10.22105/riej.2022.344405.1316
Kashani, A. R., Camp, C. V., Azizi, K., & Rostamian, M. (2022). Multi‐objective optimization of mechanically stabilized earth retaining wall using evolutionary algorithms. International Journal for Numerical and Analytical Methods in Geomechanics, 46(8), 1401-1433. https://doi.org/10.1002/nag.3352
He, Y., Guo, S., Zhou, J., Ye, J., Huang, J., Zheng, K., & Du, X. (2022). Multi-objective planning-operation co-optimization of renewable energy system with hybrid energy storages. Renewable Energy, 184(C), 776-790. https://doi.org/10.1016/j.renene.2021.11.116
Xu, M., Zeng, G., Wu, D., Mou, J., Zhao, J., Zheng, S., & Ren, Y. (2022). Structural optimization of jet fish pump design based on a multi-objective genetic algorithm. Energies, 15(11), 4104-4119. https://doi.org/10.3390/en15114104
Le Gia, T. T., Dang, H. A., Dinh, V. B., Tong, M. Q., Nguyen, T. K., Nguyen, H. H., & Nguyen, D. Q. (2022). A simulation-based multi-objective genetic optimization framework for efficient building design in early stages: application for Vietnam's hot and humid climates. International Journal of Building Pathology and Adaptation, 40(3), 305-326. https://doi.org/10.1108/IJBPA-04-2021-0050
Xue, Q., Wang, Z., & Chen, Q. (2022). Multi-objective optimization of building design for life cycle cost and C0(2) emissions: A case study of a low-energy residential building in a severe cold climate. Building Simulation, 15(1), 83-98. https://doi.org/10.1007/s12273-021-0796-5
Lin, B., Chen, H., Liu, Y., He, Q., & Li, Z. (2021). A preference-based multi-objective building performance optimization method for early design stage. Building Simulation, 14(3), 477-494. https://doi.org/10.1007/s12273-020-0673-7
Alshboul, O., Shehadeh, A., Almasabha, G., Mamlook, R. E. A., & Almuflih, A. S. (2022). Evaluating the impact of external support on green building construction cost: A hybrid mathematical and machine learning prediction approach. Buildings, 12(8), 1256-1278.https://doi.org/10.3390/buildings12081256
Damand, D., Lahrichi, Y., & Barth, M. (2023). Parameterisation of demand-driven material requirements planning: A multi-objective genetic algorithm. International Journal of Production Research, 61(15), 5134-5155. https://doi.org/10.1080/00207543.2022.2098074
Chen, Z., Zuo, W., Zhou, K., Li, Q., Huang, Y., & Jiaqiang, E. (2023). Multi-objective optimization of proton exchange membrane fuel cells by RSM and NSGA-II. Energy Conversion and Management, 277, 116691. https://doi.org/10.1016/j.enconman.2023.116691
Jaafar, K., & El-Halawani, L. I. (2022). Simulation-based multi-objective optimization model for machinery allocation in shallow foundation. International Journal of Construction Management, 22(15), 2845-2854. https://doi.org/10.1080/15623599.2020.1827693
Liu, S. S., & Wang, C. J. (2007). Optimization model for resource assignment problems of linear construction projects. Automation in Construction, 16(4), 460-473. https://doi.org/10.1016/j.autcon.2006.08.004
Peng, J., Feng, Y., Zhang, Q., & Liu, X. (2023). Multi-objective integrated optimization study of prefabricated building projects introducing sustainable levels. Scientific Reports, 13(1), 2821-2837. https://doi.org/10.1038/s41598-023-29881-6
Abdullah, J. M., Rashid, T. A., Maaroof, B. B., & Mirjalili, S. (2023). Multi-objective fitness-dependent optimizer algorithm. Neural Computing and Applications, 35(16), 11969-11987. https://doi.org/10.1007/s00521-023-08332-3
Mzili, T., Mzili, I., Riffi, M. E., Pamucar, D., Kurdi, M., & Ali, A. H. (2023). Optimizing production scheduling with the spotted hyena algorithm: A novel approach to the flow shop problem. Reports in Mechanical Engineering, 4(1), 90-103. https://doi.org/10.31181/rme040116072023m
Rabiei, P., Arias-Aranda, D., & Stantchev, V. (2023). Introducing a novel multi-objective optimization model for Volunteer assignment in the post-disaster phase: Combining fuzzy inference systems with NSGA-II and NRGA. Expert Systems with Applications, 226, 120142. https://doi.org/10.1016/j.eswa.2023.120142
Faghiri, S., Poureslami, P., Partovi Aria, H., & Shafii, M. B. (2023). Multi-objective optimization of multiple droplet impacts on a molten PCM using NSGA-II optimizer and artificial neural network. Scientific Reports, 13(1), 10543. https://doi.org/10.1038/s41598-023-37712-x
Zhang, X., Li, H., & Wang, J. (2022). Energy storage capacity optimization of non-grid-connected wind-hydrogen systems: from the perspective of hydrogen production features. Power Eng Thermophys, 1(1), 48-63. https://doi.org/10.56578/peet010106
Zhao, Z. Y., & Yuan, Q. L. (2022). Integrated multi-objective optimization of predictive maintenance and production scheduling: perspective from lead time constraints. Journal of Intelligent Management Decision, 1(1), 67-77. https://doi.org/10.56578/jimd010108
Ma, H., Zhang, Y., Sun, S., Liu, T., & Shan, Y. (2023). A comprehensive survey on NSGA-II for multi-objective optimization and applications. Artificial Intelligence Review, 56,15217–15270. https://doi.org/10.1007/s10462-023-10526-z
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Decision Making: Applications in Management and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
