Automatic Quality Inspection and Intelligent Prevention of Prefabricated Building Construction Based on BIM and Fuzzy Logic
DOI:
https://doi.org/10.31181/dmame722024991Keywords:
BIM, Computer vision, Fuzzy logic, Construction quality, Deep learning, Convolutional neural networkAbstract
The construction industry plays an important role in China's economy. However, traditional construction quality inspection methods have problems such as low efficiency, high leakage rate, and poor real-time performance. Therefore, taking the appearance quality defects of reinforced concrete engineering as an example, this study combines building information models and computer vision technology. By this way, it can achieve automatic quality inspection and intelligent quality problem prevention, to improve the quality management level during the construction process. In this study, ResNet50 network was pre-trained and classified using a self-made defect image database. After transfer learning, the accuracy values of the training and testing sets remained stable at around 0.95 and the loss value remained stable at around 0.10 after 10 epochs, indicating a significant improvement in learning performance. In the defect area quantification experiment, four corner coordinates of the defect image were calculated. These corner coordinates are simultaneously obtained and saved during on-site image acquisition. According to the calculation results, the defect area of honeycomb is approximately 67.67 square centimetres. These results confirm that this method improves the efficiency and accuracy of quality inspection and has potential application in quality inspection of prefabricated building construction.
Downloads
References
Fini, A. A. F., Maghrebi, M., Forsythe, P. J., & Waller, T. S. (2021). Using existing site surveillance cameras to automatically measure the installation speed in prefabricated timber construction. Engineering Construction and Architectural Management, 29(2), 573-600. https://doi.org/10.1108/ECAM-04-2020-0281
Lee, P. C., Lo, T. P., Wen, I. J., & Xie, L. (2022). The establishment of BIM‐embedded knowledge‐sharing platform and its learning community model: A case of prefabricated building design. Computer Applications in Engineering Education, 30(3), 863-875. https://doi.org/10.1002/cae.22490
Yuan, Y., Ye, S., & Lin, L. (2021). Process monitoring with support of IoT in prefabricated building construction. Sensors and Materials: An International Journal on Sensor Technology, 33(4), 1167-1185. https://doi.org/10.18494/SAM.2021.3003
Porwal, A., Parsamehr, M., Szostopal, D., & Ruparathna, R. (2023). The integration of building information modeling (BIM) and system dynamic modeling to minimize construction waste generation from change orders. The International Journal of construction Management, 23(1/3), 156-166. https://doi.org/10.1080/15623599.2020.1854930
Mahamood, S. Z. H., & Fathi, M. S. (2022). Seismic building design work process using building information modeling (BUM) technology for malaysian government projects. International Journal of Disaster Resilience in the Built Environment, 13(2), 211-232. https://doi.org/10.1108/IJDRBE-10-2021-0135
Arias, J., Trm, S., Carro, M., & Gupta, G. (2022). Building information modeling using constraint logic programming. Theory and Practice of Logic Programming, 22(5), 723-738. https://doi.org/10.1017/S1471068422000138
Koo, H. J., & O'Connor, J. T. (2022). Building information modeling as a tool for prevention of design defects. Construction Innovation: Information, Process, Management, 22(4), 870-890. https://doi.org/10.1108/CI-02-2021-0033
Zou, X., Xiao, F., Yu, Z., Li, Y., & Lee, Y. (2023). Delving deeper into anti-aliasing in ConvNets. International Journal of Computer Vision, 131(1), 67-81. https://doi.org/10.48550/arXiv.2008.09604
Kulkarni, U., Meena, S. M., & Gurlahosur, S. V. (2021). Quantization friendly mobileNet (QF-MobileNet) architecture for vision based applications on embedded platforms. Neural Networks, 136, 28-39. https://doi.org/10.1016/j.neunet.2020.12.022
Jain, T. (2022). Industrial objects recognition in intelligent manufacturing for computer vision. International Journal of Intelligent Unmanned Systems, 10(4), 115-129. https://doi.org/10.1108/IJIUS-04-2020-0004
Han, J., Chen, X., & Zhang, Y. (2022). DEMVSNet: Denoising and depth inference for unstructured multi-view stereo on noised images. IET Computer Vision, 16(7), 570-580. https://doi.org/10.1049/cvi2.12102
Duan, Y., & Liu, H. (2023). Research on BIM technology-based measurement method of stress parameters of prefabricated building engineering. International Journal of Critical Infrastructure, 19(3), 199-210. https://doi.org/10.1504/IJCIS.2023.130911
Yuan, X. (2023). BIM-based cycle control method for the whole process of building production and construction. International Journal of Critical Infrastructure, 19(2), 95-107. https://doi.org/10.1504/IJCIS.2023.130447
Chen, J., Lu, W., & Lou, J. (2023). Automatic concrete defect detection and reconstruction by aligning aerial images onto semantic-rich building information model. Computer-Aided Civil and Infrastructure Engineering, 38(8), 1079-1098. https://doi.org/10.1111/mice.12928
Levine, N. M., Narazaki, Y., & Spencer, B. F. (2023). Development of a building information model-guided post-earthquake building inspection framework using 3D synthetic environments. Earthquake Engineering and Engineering Vibration, 22(2), 279-307. https://doi.org/10.1007/s11803-023-2167-y
Wang, X., Cheng, M., Eaton, J., & Hsieh, C. J. (2022). Fake node attacks on graph convolutional networks. Journal of Computational and Cognitive Engineering, 1(4), 165-173. https://doi.org/10.47852/bonviewJCCE2202321
Nimrah, S., & Saifullah, S. (2022). Context-free word importance scores for attacking neural networks. Journal of Computational and Cognitive Engineering, 1(4), 187-192. https://doi.org/10.47852/bonviewJCCE2202406
Debnath, S. (2022). Fuzzy Quadri partitioned neutrosophic soft matrix theory and its decision-making approach. Journal of Computational and Cognitive Engineering, 1(2), 88-93. https://doi.org/10.47852/bonviewJCCE19522514205514
Dey, P., & Jana, D. K. (2022). Evaluation of the convincing ability through presentation skills of pre-service management wizards using AI via T2 linguistic fuzzy logic. Journal of Computational and Cognitive Engineering, 2(2), 133-142. https://doi.org/10.47852/bonviewJCCE2202158
Waziri, T. A., & Ibrahim, A. (2023).Discrete fix up limit model of a device unit. Journal of Computational and Cognitive Engineering, 2(2), 163-167. https://doi.org/10.47852/bonviewJCCE2202166
Song, D., Lu, T., & Jeudy, J. (2022). Improving sensitivity of arterial spin labeling perfusion MRI in Alzheimer's disease using transfer learning of deep learning-based ASL denoising. Journal of Magnetic Resonance Imaging, 55(6), 1710-1722. https://doi.org/10.1002/jmri.27984
Debicha, I., Bauwens, R., Debatty, T., Kenaza, T., & Mees, W. (2023). TAD: Transfer learning-based multi-adversarial detection of evasion attacks against network intrusion detection systems. Future Generations Computer Systems: FGCS, 138, 185-197. https://doi.org/10.1016/j.future.2022.08.011
Singh, D., Shukla, A., & Sajwan, M. (2021). Deep transfer learning framework for the identification of malicious activities to combat cyberattack. Future Generation Computer Systems, 125, 687-697. https://doi.org/10.1016/j.future.2021.07.015
Elghany, S. A., Ibraheem, M. R., Alruwaili, M., & Elmogy, M. (2021). Diagnosis of various skin cancer lesions based on fine-tuned ResNet50 deep network. Computers, Materials, and Continuum, 68(1), 117-135. https://doi.org/10.32604/CMC.2021.016102
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Decision Making: Applications in Management and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
